HPL bonded board consisting of a moisture-resistant particleboard type P3 to EN 312 for damp areas, surfaced on both sides with Duropal XTreme, an attractive supermatt surface material with an anti-fingerprint effect.
Duropal Element XTreme P3
Product Section
Anti-fingerprint, Easy care, Particularly low emission, Low swelling / moisture resistant, Variety of decors and/or textures, Food Harmless
Product Features
Product standard
• EN 13894-1
Core material
• ClassicBoard P3: Melamine resin bonded particleboard type P3, suitable for non load-bearing purposes in damp areas.
Reaction to fire
• Normally flammable
• D-s2,d0 (EN 13501-1, CWFT acc. to 2003/593/EG)
EC scope
• EN 438-7:2005
• HPL composite panel intended for internal wall and ceiling finishes (including suspended ceilings)
Formaldehyde emission class
• E1 E05
Product safety
• This product follows the REACH regulation EC 1907/2006 an article. Following Article 7 it does not need to be registered.
• The surface is physiologically safe, and approved for direct contact with food acc. to Regulation (EU) No. 10/2011.
Special
• FSC certification or PEFC certification available on request.
Colour and surface match
• Decor, structure and core board all influence the final appearance of the end product.
• Due to the product-specific differences in production technologies, even identical decor/structure/core board combinations can result in slight optical and tactile deviations across different product groups and formats. Such deviations do not constitute a defect.
• The choice of surface structure in particular has a significant influence on the visual impression, the tactile perception as well as the technical characteristics of the product. Thus, the overall impression of a decor can change almost completely depending on the surface structure. Furthermore, mechanical influences on the product surface can lead to a higher contrast optical perception with dark decors.
• To ensure that you always achieve the best results with our products and to clarify any deviations in advance, we will be happy to advise you individually.
Certificates & Labels
Blue Angel DE-UZ 76
The Blue Angel has been the federal government’s eco-label for 40 years. Independent and credible, it sets demanding standards for environmentally friendly products and services. The Blue Angel is the orientation for sustainable purchasing.
FSC-certified
The Forest Stewardship Council (FSC) is a global, not-for-profit organization dedicated to the promotion of responsible forest management worlwide. FSC defines standards based on agreed principles for responsible forest stewardship that are supported by environmental, social and economic stakeholders.
PEFC certified
PEFC is the largest institution for ensuring sustainable forest management through an independent certification system. Wood and wood products with the PEFC seal originate demonstrably from ecologically, economically and socially sustainable forestry.
CE conformity
The CE-marking documents that goods comply with the safety and health requirements of the European Union. Its aim is to guarantee safe, flawless and high-quality goods on all European markets.
UKCA conformity
The UKCA-marking documents that goods comply with the safety and health requirements of the United Kingdom. Its aim is to guarantee safe, flawless and high-quality goods on all United Kingdom markets.
FSC Chain of Custody
PEFC Chain of Custody
Declaration of the origin of Wood (EUTR) - 1
Declaration of the origin of Wood (EUTR) - 2
REACH declaration
Sustainability statement – Blue Angel DE-UZ 76
Proove of food harmless – Certificate of compliance – ISEGA – Duropal XTreme / Duropal XTreme Touch
Declaration of Performance (CE) – Ref. No. 054 Duropal Element P3
Declaration of Conformity (UKCA) – Ref. No. 44054 Duropal Element P3
Certificate "Blue Angel – The Environmental Label" (RAL DE-UZ 76) – Duropal Element P3 / Duropal Element XTreme P3 / Duropal Element XTreme Touch P3 / Duropal Element XTreme plus P3
Formats
| Length (mm) | Width (mm) | Thickness (mm), HPL 0.8 mm |
|---|---|---|
| 4,100 | 1,300 | 17.6 | 20.6 |
Areas of Application
Ideal for surfaces in furniture production and interior fitting where exceptional sturdiness and moisture resistance is required: For kitchen and bathroom furniture, elements in sanitary areas, in shop fitting and interior design construction, in clinics and laboratories plus workplaces such as in the foodstuffs processing industry.
Furniture and interior fitting
Technical Downloads
Information on the safety data sheet for Pfleiderer products
ProHPL/ICDLI – Technical Leaflet
Product Information – General disposal of Pfleiderer products
Product Information – Relevant product certificates for building certification
Product information – Duropal HPL, Duropal HPL Compact and Duropal Elements with transport foil
Product information – Resistance to disinfectant, stain resistance and chemical resistance of Duropal Laminates
Cleaning recommendations Decorative Pfleiderer products
Product Information – Cutting decorative Pfleiderer products
Product Information – Duropal Element XTreme / Duropal Element XTreme Touch / Duropal Element XTreme plus with asymmetrical construction
Technical data Duropal Element XTreme P3
Product Handling
Processing
• Can be worked with carbide tipped tools on conventional woodworking machines.
Edging
• Thick and thin edges are suitable.
• EVA and PUR hotmelts are recommended for edge adhesion.
Fitting technology
• All conventional removable and non-removable fittings for solid wood and wood materials are suitable.
Installation and assembly
• Sufficient conditioning is required prior to installation and assembly. The premises themselves need to be at the normal climatic conditions in which the material will later be used.
• Please ensure that the material is processed and fitted correctly and using the best available technology.
• Especially for large applications, we recommend paying attention to the colour and texture uniformity of the boards and cut products used when further processing and installing and that the production direction is taken into account.
Storage, handling and transport
• On level, full area surfaces (e.g. pallets), protected against moisture, in dry, ventilated rooms. Outdoor storage is not suitable.
• Please note that incorrect storage, regardless of its duration, may cause irreversible distortion to the sheets.
• Foreign bodies or impurities in the pallet of sheets can lead to impressions and damage to the surface of the board.
• Ensure that sufficiently large and sturdy bases, e.g. pallets, are used for the transportation of stacked sheets. The sheets on the pallet must be secured against slipping.
• Sheets / boards must not be moved against each other; they should be moved individually by hand or with suction equipment.
Health and safety
• Please wear the appropriate personal protective equipment (PPE) when processing and handling.
Cleaning and care
• The surface can be cleaned with water and non-aggressive cleaning products. For more detailed information, please refer to our “Cleaning recommendation Decorative Pfleiderer products”.
• For further information, please follow the recommendation in the “Cleaning HPL” leaflet on the site www.icdli.com.
Disposal
• We recommend material or energy recovery in approved plants.
Brochures
Sustainability Report 2022
WORKBOOK – Complete product range wood-based panels 2021 - 2024
